Company > Latest News

Foton Cummins F2.5 Engine Officially Released!

Views : 364
Author : Commercial Vehicles and Components
Update time : 2022-01-22 17:01:26
On September 6, the launch ceremony of the Foton Cummins F2.5 engine with the theme of "Classic Inheritance, Wisdom and Leadership" was held at the Foton Cummins F plant. This light-duty diesel engine was officially released for light truck transportation and efficient attendance.
 

 
Not just adapting to "new regulations" but meeting customized needs + efficient attendance
Previously, the Ministry of Industry and Information Technology and the Ministry of Public Security jointly issued the "Notice on Further Strengthening the Production and Registration Management of Light Trucks and Small and Mini Passenger Vehicles" (draft for comments). The "Draft for Comments" clearly requires that for light trucks with a total mass exceeding 3500kg (excluding passenger vans), the engine (diesel) displacement is not more than 2.5L (excluding refrigerated vehicles).
 
"New regulations" require displacement ≤ 2.5L, and blue card light trucks are redefined. In such a market environment, the Foton Cummins F2.5 National VI engine came into being. This product adheres to the excellent power gene of the Foton Cummins F series and is blessed by cutting-edge smart technology. It is suitable for the latest "Blue Card Light Truck New Regulations" standard requirements, which can meet the customized needs of OEM products and meet the end users. The expectation of efficient attendance of light trucks.
 
Kaijun Wang, Vice President of Cummins, General Manager of China Engine Division
 
According to reports, Fukang F2.5 products have fully absorbed the dynamic input of the market and customer needs, focusing on the needs of both high efficiency and cargo loading of blue-brand light trucks. Comprehensive upgrade of performance and reliability. Chang Rui, general manager of Foton Motor, said: "The Foton Cummins engine is not only the result of the cooperation between Foton Motor and Cummins, but also a model of clean and efficient power in China. The new generation of Foton Cummins F2.5 National VI power will help Foton light trucks in the blue card era. Continuing to lead the development of the industry is an important starting point for us to achieve the goal of the next 10 million units."
 

Rui Chang, General Manager of Foton Motor
 
Inheriting the excellent performance of the F series and upgrading the four major advantages
The Foton Cummins F2.5 National VI engine is upgraded from the classic F platform. While inheriting the excellent performance genes of the F series, it is specially developed for the operating conditions in the blue card environment, and comprehensively upgrades reliability, power, economy and driving comfort. The advantages of the products are mainly reflected in reliability, strength and intelligence , worry-free and other four aspects.
 
Foton Cummins F2.5 Engine with National VI Emission Standards

Foton Cummins F2.5 follows the non-EGR design of the Foton Cummins National VI platform, and the system structure is simpler, making the more complex National VI system better than the National Five level in the same period in reliability. The hardware such as the supercharger, camshaft and power cylinder of the Foton Cummins F2.5 has been upgraded and optimized. The power covers 96-130kW, the low-speed torque is increased by 10%, and the maximum torque reaches 460Nm. The wider low-speed and high-torque range, coupled with the customized and scenario-based development mode, ensures that the engine can adapt to various complex and difficult working conditions, and is fully applicable to off-highway equipment such as light trucks, VANs, pickups, and small construction machinery. The .5 National VI engine is a powerful and reliable partner in many working conditions.

In addition, the Fukang F2.5 engine adopts the Foton Cummins Smart Brain CBM2.0 system, which integrates the electronic control management of the engine and post-processing, combined with the big data CDS and CSU of the Internet of Vehicles, so as to improve the attendance rate of the whole vehicle. Coupled with intelligent fuel consumption management and start-stop technology, it achieves higher fuel efficiency and reduces fuel consumption, especially under the WHTC engine cycle condition to further save fuel, which is more suitable for typical blue card operation. At the same time, the adaptability of Fukang F2.5 to oil products has also been greatly improved. The DPF-free ash cleaning mileage of the post-processing system is as high as 500,000 kilometers. Based on the average annual mileage of 50,000 kilometers in the urban distribution market, it can basically achieve 10 years. Free cleaning. F2.5 is also further optimized in NVH, the engine idling noise is only 68dBA, and the operation process is worry-free and comfortable.

 
Light truck compliance is the only way out. F2.5 will be launched in batches in the fourth quarter
The Foton Cummins F-series platform, which has always been in the leading position in the industry, has been upgraded again and again, and there are many customers who have no major repairs for millions of kilometers. Since the launch of the Fukang F series, the cumulative sales volume has exceeded 1.5 million units, with customers all over the world, covering almost all the world's mainstream light commercial vehicle manufacturers. Foton Cummins F2.5 was launched after a series of upgrades, which can be described as 'classic inheritance, wisdom and leadership.
 

Foton Cummins F Series Engine

It is worth mentioning that Cummins and Foton Motor jointly established Beijing Foton Cummins Emission Treatment System Co., Ltd. at the beginning of this year. Its products will better match the Foton Cummins engine, and also provide a matching advanced aftertreatment system for F2.5. Better compatibility, to achieve the performance improvement of the whole engine system.
 
Hua Chen, General Manager of Foton Cummins Engine Co., Ltd.
 
It is understood that the Foton Cummins F2.5 light-duty engine will first be installed on the Foton Omar and Oling Blue light trucks, and will also be equipped with other blue light trucks in succession. As for the final launch date of the F2.5 engine, according to people familiar with the matter, it will be launched in batches in the fourth quarter of this year. At that time, in addition to Foton's own light truck products, the Fukang F2.5 will be installed in more compliant light trucks.